General Spectrometer Accessories
Chemplex Industries SAMPLECUPS 39.1MM DIA.SNAPPOST
CHEMPLEX XRF SAMPLE CUPS, 39.1 Dia., mm, Snap-Post Venting
Glass Expansion Nickel Sampler Cone, Version B, Dry Plasma (319-541)
Nickel Sampler Cone, Version B, Dry Plasma (319-541) For Nu Instruments Plasma2, Plasma3, Attom ES ICP-MS. Suitable for laser ablation applications. Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. When not in use, keep cones stored in original packaging for protection. Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Thermo Scientific SS Ion Transfer Tube 1 EA
Stainless steel tube for transferring ionized samples likely used in analytical chemistry instrumentation to move ionized molecules between components of a mass spectrometry or other analysis system with stainless steel construction allowing for inert sample transfer without reactions with tube walls.
Perkin Elmer US LLC EA-6000, 50 g., Pkg.5
EA-6000 is a reagent intended for use with 2400 CHNS/O Elemental Analyzer.
Perkin Elmer US LLC Disposable Desiccant Kit - Qty. 2
FT-IR spectrometers require dessicant kits to keep their optical paths moisture-free. PerkinElmer recommends that your instrument's desiccant be replaced every six months. Your spectrometer's manual has instructions on how to install the dessicant. Depending on the spectrometer, you will need two to three dessicant kits every six months.
Glass Expansion Tapered Quartz Injector 1.0mm
Quartz Tapered Injector with 1.0mm ID. 1.0mm ID tapered quartz injector. This quartz injector is for use with PerkinElmer Optima 4300V/5300V/7300V Series ICP-OES instruments. They are designed for organic solvents and non-HF matrices. A variety of sizes are available as an alternative to the standard injector.PerkinElmer Optima 4300V/5300V/7300V ICP-OES Series Injectors - Compatible with 50-190-7156 (31-808-2821), 50-190-6981 (30-807-0064), 50-190-7033 (30-808-3593), 50-190-7020 (30-808-2832), 50-210-4733 (N0771561), 50-904-3809 (N0771500). Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Injector Ferrule for D-Torch
Injector Ferrule for D-Torch. Compatible with Glass Expansion’s D-Torch for Horiba JY (30-808-2882).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Quartz Outer Tube
Quartz Outer Tube. Compatible with Thermo (TJA) Iris, Tracescan, Trace, Advantage, Intrepid Axial ICP-OES, Glass Expansion's PT2000 Fully Demountable Torch (30-808-0171). The fully demountable torch, provides a robust and high-performing alternative to both single-piece and semi-demountable quartz torches, ensuring greater robustness and a lower cost of ownership. With the fully demountable torch design, the analyst most often replaces only the outer tube, rather than replacing the entire torch or a quartz torch body.When not in use, clean as per recommended guidelines, and store in original box.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion High Efficiency Quartz Torch for Elan/NexION
High Efficiency Quartz Torch for Elan/NexION (W1008384). Compatible with PerkinElmer Elan 6000, 9000, DRC II, DRC-E and NexION 300/350 ICP-MS. Standard Quartz Torch is P/N 30-808-8107. Use GazFit Connectors for 6mm OD torch side arms PKT 4, (GAZ-06), which make connections to torch side arms with soft walled tubing for argon gas supply.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Contour Flared End Viton Pump Tube 2tag, 127mm spacing, 1.14mm ID, Red/Red (PKT 6)
Contour Flared End Viton Pump Tube 2tag, 127mm spacing, 1.14mm ID Red/Red (PKT 6).Tag Colors: Red/RedID mm: 1.14Wall Thickness mm: 0.90OD mm 2.94Overall Length: 175mm (127mm spacing between tags)Number of Tubes Per Pack: 6Physical Properties: Fluoropolymer elastomerSpecial Properties: Special tubing for concentrated acids and corrosive solventsMaterial: Made from Fluran HC F-5500-A or equivalent.Limitations: Limited service lifeGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion IsoMist XR Kit for Spectro Blue/Green SOP ICP-OES
IsoMist XR Kit for Spectro Blue/Green SOP. Compatible with Spectro Blue/Green SOP ICP-OES. This IsoMist XR is programmable and temperature-controlled, with a glass cyclonic spray chamber now featuring an improved thermodynamic design that provides an extended temperature range of -25°C to +80°C. The temperature is settable in 1°C increments and can maintain accuracy of + or – 0.1°C. Proven performance results are, improved long-term stability and precision, no dilution for volatile organic solvents, reduced oxide interferences (ICP-MS), enhanced sensitivity and accuracy, lower detection limits, faster washout, and reduced hazardous waste/disposal fees.Replacement parts include 21-809-3185, GAZ-04-90, and 501907304.The IsoMist XR comes standard with a borosilicate glass spray chamber. Optional quartz or PFA HF-resistant spray chambers can be ordered separately.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion DuraMist DC Nebulizer 0.4mL/min, Includes NFT-16-50 UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 piece), and 70-803-1070 Gas Fitting with Ratchet Nebulizer connector
DuraMist DC Nebulizer 0.4mL/min, includes UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 pc) and DC Gas Fitting Type 21 with ratchet connector (1 pc). Compatible with Perkin Elmer Optima ICP-OES.Optimum nebulizer gas flow rate is 0.7L/min & sample flow rate is 0.4mL/min. Recommended not to exceed optimum 0.4mL/min sample flow rate; however, lower gas & sample flow rates are OK. The backpressure should read ~40 psi at 0.7L/min gas flow rate. DuraMist is an economical inert nebulizer for high-precision analysis & the highest tolerance to TDS, up to 30%. Made from PEEK, it tolerates up to 5% HF.Replacement parts include P/Ns 502702959 and 70-803-1070.Recommend nebulizer maintenance tools are Fluka RBS25 (P/N NC9000117) & Eluo Nebulizer Cleaning Tool (P/N 501907353). When nebulizer is not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Conikal U-Series Nebulizer 1mL/min, Includes NFT-16-50 UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 piece), and EL-1 EzyLok Connector Kit.
Conikal U-Series Nebulizer 1.0 mL/min, includes UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 pc.) and EzyLok Connector (1 pc.).Optimum nebulizer gas flow rate is 0.7L/min and sample flow rate is 1.0mL/min. Recommended not to exceed optimum 1.0mL/min sample flow rate; however, lower gas and sample flow rates are OK. The backpressure should read approximately 40psi at 0.7L/min gas flow rate. The Conikal nebulizer is a high-performance, general use glass nebulizer, that tolerates up to 5% TDS and 75um particulates. Replacement parts include P/Ns 502702959 and 502702994.Recommend nebulizer maintenance tools, Fluka RBS25 (P/N NC9000117) and Eluo Nebulizer Cleaning Tool (P/N NC9462559). When nebulizer is not in use, best to store in the provided hard plastic case.Consider upgrading to our new Direct Connect (DC) Conikal to take advantage of the cost-effective design improvements.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion D-Torch for Spectro SOP (without injector)
D-Torch with quartz outer tube & installation guide, requires choice of injector. Compatible with Spectro SOP ICP-OES.A patented, precision-engineered, demountable torch, with a replaceable quartz outer tube. Since the quartz outer tube is usually the first to wear and can be replaced, the D-Torch provides a much lower operating cost than other demountable torches. It also incorporates a more robust ceramic inner tube and has the same mounting system as the standard fixed torch. Additionally, the D-Torch features interchangeable injectors, allowing flexibility in the installation of method specific injectors, whether it be for aqueous (~2.0mm ID), organics (<2.0mm ID), high TDS (>2.0mm ID) HF (alumina) or high purity (sapphire). Replacement parts include 31-808-2942, 501907165, 31-808-3177, 31-808-2962, 501907155, GAZ-04Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Straight Quartz Connector for Agilent 7500
Straight Quartz Connector for Agilent 7500.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001